| Applicability: |
eCFR Subpart BBBBBBB  [ecfr.gov]
Subpart BBBBBBB applies to new and existing chemical preparation at area sources of HAP* with mixing, blending, milling, and extruding operations to manufacture chemical preparations. Chemical preparation means a target HAP-containing product, or intermediate used in manufacturing other products, manufactured in a process described by NAICS code 325998 if the operation manufactures target HAP-containing products.
Target HAPs are: Chromium (IV), lead, and nickel > .1% by weight and Chromium (III) and manganese > 1.0% by weight.
Not subject to this rule: Manufacturing of indelible ink, India ink, writing ink, and stamp pad ink or sources subject to 40 CFR Part 63 Subpart VVVVVV or CCCCCCC.
*An area source of HAP has the potential to emit <10 tons per year (tpy) of a single HAP or <25 tpy of a combination of HAPs. |
| Rules apply to small, area sources? |
Yes |
| Known Sources in NDEQ Jurisdiction: |
|
| Date of Original Final Rule: |
12/30/09 |
| Amendments Dates: |
12/30/2009 - Final Rule |
| State Regulations (Title 129): |
As of September 28, 2022: Title 129, Chapter 13, 002.117
Previously: Title 129, Chapter 28, Section 001.117.
Sources are also responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR. |
| Federal Regulations: |
40 CFR 63.11579 |
| Related Rules: |
Subpart VVVVVV - Chemical Mfg. - Area Sources
Subpart CCCCCC - Paint & Allied Products |
| Regulations and Federal Registers: |
eCFR Subpart BBBBBBB  [ecfr.gov]
(See attached file: 7B - Fed. Reg. 12-30-2009 - final rule.pdf)
(See attached file: 7B - Fed. Reg. 09-05-2009 - proposed rule.pdf)
|
| Forms: |
(See attached file: 6B - Compliance and Initial Notification Form.docx)(See attached file: 6B - Compliance and Initial Notification Form.pdf)(See attached file: 6B - Notice of Intent Op Limits.docx)(See attached file: 6B - Notice of Intent Op Limits.pdf)
|
| Important Dates: |
Source Classification
- Existing Source = constructed or reconstructed before 8/5/09
- New Source = constructed or reconstructed on or after 8/5/09
Initial Notification
- Existing source = 4/29/10
- New source = 4/29/10 or 120 days after startup
Compliance Dates
- Existing source = 12/30/2010
- New source = 12/30/09 or upon startup
Notice of Intent to Test
Compliance Status Notification
- Existing Source = 2/28/11 or 60 days after performance test
- New Source = 2/28/10 or 60 days after compliance date or performance test
Compliance Reports
- No deviations
- Annual
- First report covers period beginning on compliance date up to December 31
- Subsequent reports cover January 1- December 31
- Submit by January 31
- Deviations
- Semiannual
- Covers period beginning on compliance date up to June 30 or December 31, whichever is the first date following the end of the first calendar half after compliance date
- Due July 31 or January 31, whichever follows the above period
- Subsequent reports
- January 1 – June 30 and due July 31
- July 1 – December 31 and due January 31
|
| FAQs, Fact Sheets, and Rule Summaries: |
|
| Presentations, Training and Articles: |
|
| Other Information and Resources: |
|
| Notes: |
|
| Page Last Updated: |
11/1/22 |