| Applicability: |
e-CFR Subpart DDDDDDD  [ecfr.gov]
Subpart DDDDDDD applies to new and existing prepared animal feed manufacturing facilities that use material containing chromium or manganese located at an area source of hazardous air pollutants (HAP). Animal feed does not include feed for dogs and cats. Generally, this includes sources with the NAICS code 311119.
HAPs of concern are chromium and manganese.
Not subject to this rule:
- Research and development as defined in section 112(c)(7) of the Clean Air Act;
- Feed production processes at facilities whose primary business is raising or feeding animals;
- Facilities engaged in the growing of crops used in manufacture of feed;
- Feed manufacturing of dog and cat feed; and
- Feed manufacturing where chromium or manganese products are not added.
*An area source of HAP has the potential to emit <10 tons per year (tpy) of a single HAP or <25 tpy of a combination of HAPs.
|
| Rules apply to small, area sources? |
Yes |
| Known Sources in NDEQ Jurisdiction: |
(See attached file: 7D Sources.pdf)
|
| Date of Original Final Rule: |
1/5/10 |
| Amendments Dates: |
12/23/2011 - Direct Final Rule
07/20/2010 - Direct Final Rule
01/05/2010 - Final Rule |
| State Regulations (Title 129): |
This air standard is currently not adopted into Title 129. Sources are responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR. |
| Federal Regulations: |
40 CFR 63.11619 |
| Related Rules: |
Subpart DD - Grain Elevators |
| Regulations and Federal Registers: |
e-CFR Subpart DDDDDDD  [ecfr.gov]
(See attached file: 7D - Fed. Reg. 12-23-2011 - direct final.pdf)
(See attached file: 7D - Fed. Reg. 07-20-2010 - correction - direct final.pdf)
(See attached file: 7D - Fed. Reg. 01-05-2010 - final rule.pdf)
(See attached file: 7D - Fed. Reg. 07-27-2009 - proposed rule.pdf)
|
| Forms: |
NDEQ Notification Forms
(See attached file: 7D - Initial Notification Form.pdf)(See attached file: 7D - Initial Notification Form.docx)
(See attached file: 7D - Compliance Status Notification Form.pdf)(See attached file: 7D - Compliance Status Notification Form.docx)
*Compliance Status Notification Form - due 5/4/12
|
| Important Dates: |
Source Classification
- Existing Source = constructed or reconstructed on or before 7/27/09
- New Source = constructed or reconstructed after 7/27/09
Initial Notification
- New & existing source = 5/5/10 or 120 days after startup
Compliance Dates
- New source = 1/5/10 or upon startup
- Existing source = 1/5/12
- If exceed >50 ton/day pelleted feed production for calendar year = comply by July 1 of following year
Compliance Status Notification
- New Source = 5/5/10 or 120 days after startup
- Existing Source = 5/4/12
Compliance Reports
- Prepare annually
- Calendar year January 1 – December 31
- Submit by March 1 only if
- Non-compliance with rule OR
- Deviations from the cyclone operating parameters
|
| FAQs, Fact Sheets, and Rule Summaries: |
(See attached file: 7D - EPA Brochure.pdf)
(See attached file: 7D - EPA Q & A - 01-2011.pdf)
|
| Presentations, Training and Articles: |
(See attached file: 7D - EPA Presentation 12-2010.pdf)
7D - EPA Webinar  [epa.gov] - April 23, 2010 - Video & Materials
|
| Other Information and Resources: |
(See attached file: 7D - No Action Assurance Regarding the Prepared Manufacturing Area Source Air Toxics Regulations.pdf)
EPA's Area Source Website  [epa.gov] - guidance documents for all area source rule
|
| Notes: |
|
| Page Last Updated: |
11/2/22 |