Air Toxics Notebook
Metal Can Surface Coating -  Subpart KKKK

Applicability: eCFR Subpart KKKK [ecfr.gov]

Applies to major source of HAP that coats metal cans and uses 1,500 gallons of coating or more per year.
Rules apply to small, area sources? No
Known Sources in NDEQ Jurisdiction: No
Date of Original Final Rule: 11/13/03
Amendments Dates: 01/06/2006 - Direct Final Rule
11/13/2003 - Final Rule
State Regulations (Title 129): Title 129,Chapter 28, Section 001.79. Sources are also responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR.
Federal Regulations: 40 CFR 63.3480
Related Rules:

NSPS – 40 CFR Part 60

Subpart WW - Beverage Can Surface Coating

NESHAP – 40 CFR Part 63
Subpart MMMM - Miscellaneous Metal Parts and Products Coating
Subpart SSSS – Surface Coating of Metal Coil
Subpart HHHHHH - Paint Stripping and Misc. Surface Coating (Area Sources)
Subpart XXXXXX - Metal Fabrication (Area Sources)
Regulations and Federal Registers:
eCFR Subpart KKKK [ecfr.gov]

(See attached file: 4K - Fed. Reg. 2006-04-20 - Final Rule; Amendments.pdf)

(See attached file: 4K - Fed. Reg. 2003-11-13 - Final Rule.pdf)

SizeFile Name
291 KB 4K - Fed. Reg. 2006-04-20 - Final Rule; Amendments.pdf
389 KB 4K - Fed. Reg. 2003-11-13 - Final Rule.pdf
Forms:
Important Dates:
FAQs, Fact Sheets, and Rule Summaries: EPA's Subpart KKKK Website [epa.gov] - contains federal register notices and implementation tools
Presentations, Training and Articles:
Other Information and Resources: (See attached file: EPA Surface coating overlap.pdf)
SizeFile Name
367 KB EPA Surface coating overlap.pdf
Notes:
Page Last Updated: 6/22/18