Air Toxics Notebook
Metal Coil Surface Coating -  Subpart SSSS

Applicability: eCFR Subpart SSSS [ecfr.gov]

Applies to major source of HAP that has a metal coil surface coating line that applies an organic coating to the surface of a metal coil that is at least .15 mm thick (.006 inches).
Rules apply to small, area sources? No
Known Sources in NDEQ Jurisdiction:

Facility ID

Name
Location
35548
Nucor Vulcraft Nebraska
Norfolk

Date of Original Final Rule: 6/10/02
Amendments Dates: 03/17/2003 - Final Rule; Technical Correction
06/10/2002 - Final Rule
State Regulations (Title 129): Title 129,Chapter 28, Section 001.58. Sources are also responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR.
Federal Regulations: 40 CFR 63.5080
Related Rules:

NSPS – 40 CFR Part 60

Subpart TT - Metal Coil Coating

NESHAP – 40 CFR Part 63
Subpart MMMM - Misc Metal Parts and Products Surface Coating
Subpart HHHHHH - Paint Stripping & Surface Coating (area sources)
Subpart XXXXXX - Metal Fabrication & Finishing (area sources)
Regulations and Federal Registers:
eCFR Subpart SSSS [ecfr.gov]

(See attached file: 4S - Fed. Reg. 2003-03-17 - Final Rule; Technical Correction.pdf)

(See attached file: 4S - Fed. Reg. 2002-06-10 - Final Rule.pdf)

SizeFile Name
133 KB 4S - Fed. Reg. 2003-03-17 - Final Rule; Technical Correction.pdf
329 KB 4S - Fed. Reg. 2002-06-10 - Final Rule.pdf
Forms:
Important Dates: (See attached file: 4S - EPA Compliance Timeline.pdf)
SizeFile Name
30 KB 4S - EPA Compliance Timeline.pdf
FAQs, Fact Sheets, and Rule Summaries: EPA's Subpart SSSS Website [epa.gov] - contains federal register notices and implementation tools
Presentations, Training and Articles:
Other Information and Resources: (See attached file: EPA Surface coating rules overlap.pdf)
SizeFile Name
367 KB EPA Surface coating rules overlap.pdf
Notes:
Page Last Updated: 6/27/18