Air Toxics Notebook
Auto & Light Duty Trucks Surface Coating -  Subpart IIII

Applicability: eCFR Subpart IIII [ecfr.gov]

Applies to major source of HAP that applies a topcoat to new automobiles, new trucks, or new automobile/truck parts.
Rules apply to small, area sources? No
Known Sources in NDEQ Jurisdiction: No
Date of Original Final Rule: 4/26/04
Amendments Dates: 04/24/2007 - Direct Final Rule
12/22/2006 - Direct Final Rule
04/26/2004 - Final Rule
State Regulations (Title 129): Title 129,Chapter 28, Section 001.87. Sources are also responsible for ensuring they are in compliance with current federal requirements found for this subpart in the CFR.
Federal Regulations: 40 CFR 63.3080
Related Rules:

NSPS – 40 CFR Part 60

Subpart MM – Auto and Light-Duty Truck Surface Coating Operations

NESHAP - 40 CFR Part 63
Subpart MMMM - Misc. Metal Parts Surface Coating
Subpart HHHHHH - Paint Stripping & Surface Coating (auto body shops - area sources)
Subpart XXXXXX - Metal Fabrication & Finishing
Regulations and Federal Registers:
eCFR Subpart IIII [ecfr.gov]

(See attached file: 4I - Fed. Reg. 2007-04-24 - Direct Final Rule.pdf)

(See attached file: 4I - Fed. Reg. 2006-12-22 - Direct Final Rule.pdf)

(See attached file: 4I - Fed. Reg. 2004-04-26 - Final Rule.pdf)

SizeFile Name
190 KB 4I - Fed. Reg. 2007-04-24 - Direct Final Rule.pdf
157 KB 4I - Fed. Reg. 2006-12-22 - Direct Final Rule.pdf
447 KB 4I - Fed. Reg. 2004-04-26 - Final Rule.pdf
Forms:
Important Dates:
FAQs, Fact Sheets, and Rule Summaries: EPA's Subpart IIII Website [epa.gov] - contains federal register notices and implementation tools
Presentations, Training and Articles:
Other Information and Resources: (See attached file: EPA Surface coating overlap.pdf)
SizeFile Name
367 KB EPA Surface coating overlap.pdf
Notes:
Page Last Updated: 6/21/18